When the laboratory emulsifier works, it runs at a high speed up to 23,000 rpm, while the input power of the laboratory emulsifier is small or large.
Dozens of watts, generally 200 Watts - 500 watts, the largest 750 watts; output power is generally 200 watts to 500 watts. The nature of the experimental medium is also different.
The viscosity is also different. The higher the rotational speed, the greater the torque, the greater the load of the emulsifier; the greater the viscosity, the greater the load of the emulsifier. Due to electricity
The machine has small power and high speed, and the motor is easy to generate heat. After 15 minutes of operation, the motor starts to burn. If it continues to run, the motor will start running.
The higher the temperature rises, at this point, if the motor does not stop running, the coil will be because of high temperature, resulting in enamelled wire melting, aging, the coil will be
The short-circuit caused by the decrease of insulation performance caused the motor to burn out.
Keywords laboratory emulsification machine emulsifier basket type lapping machine static mixer
Website yfuzhen.cn
|
